- Follow Us
By Lindsay Albers on August 1 2017
Currently, Chasm, 100 Mile House and parts of Williams Lake are all evacuated due to Forest fires. Over 39,000 people have been affected by the wildfires, and many of them are West Fraser friends and family. To all of the emergency personnel and wildland firefighters, your hard work does not go unnoticed. Thank you so much for all that you have and continue to do in fighting some of the worst blazes in British Columbia’s history. The fires may not be extinguished tonight or tomorrow, but they will be fought and we will rebuild stronger and more resilient than before.
As mentioned earlier in my last post, I was fortunate enough to travel to all of West Fraser’s Canadian divisions from July 3rd to July 13th. The intent behind this trip is to get a well-rounded look at each mills’ nonhazardous residuals, and submit samples for testing on materials that could be handled more efficiently. The third part of the trip involves meeting with local partners to find useful ways of utilizing our wood products in agriculture, oil and gas, farming, and landscaping applications.
The first day of my West Fraser Tour was an early start for the southernmost regions of The Cariboo/Central Interior of BC. On the agenda is meeting with four environmental coordinators at four different mills in three different forestry towns.
The Chasm Sawmill is located 8km south of 70 Mile House, and 9km North of Clinton, BC. This mill was built by Ainsworth Lumber Company Ltd. and was repurchased by West Fraser in 2000. After almost two years’ worth of upgrades, the mill reopened in June 2002 with a capacity of 200,000 Mbfm per year. Once opened in 2002, the original stud mill was transformed into a dimensional lumber mill. The Sawmill itself is in a beautifully scenic area, surrounded by lush forests, the Arrowhead Hills, Chasm Ecological Reserve and the Marble Mountain Range. The highlight of Chasm is the glacial chasm the area is named after, a 10km opening in the earth with steep cliffs and jaw dropping geology that gradually makes its way down to Loon Lake. Everyone I spoke to at the sawmill had suggested I check it out before heading North, and I was not disappointed!
The town of 100 Mile House is an hour’s drive south of William’s lake, or a two hour drive north of Kamloops, BC. The town got its name in 1862, as it was the next town center at the 100 mile mark on the Cariboo highway from Lillooet, BC. The town boasts the world’s largest set of cross-country skis, and is becoming well known for their variety of bird species in nearby provincial parks. The West Fraser lumber mill is neighbored by Norbord sawmills and the blue waters of Exeter Lake. 100 Mile Lumber produces dimensional boards in 12, 14, 16 and even 20 ft. lengths. On the bio solids front, OML caught my interest as they developed an onsite soil farm back in the 1970s. The goal was to look at the efficacy of ash and woody debris in soil remediation applications. Since biomaterials and soil problems were not on the radar back then, the farm was no longer contributed to and left to mature over the coming decades. When we returned during my visit, the soil in the area was a healthy dark brown filled with organics and covered in tall, lush grasses. We may be on to something here!
Williams Lake is the home of Rick Hansen, Carey Price, Sydney Goward, and the Timber Kings TV Show. This town is the largest city center between Kamloops and Prince George with approximately 10, 000 residents. Williams Lake is surrounded by cattle covered ranches, deep valleys, the Fraser River, Soda Creek and thousands of acres of spruce and pine forests. West Fraser has two mills in Williams Lake; Williams Lake Lumber (WLK) and Williams Lake Plywood (WLP). The lumber mill is a dimensional board mill that primarily processes large logs. Williams Lake Plywood produces spruce and pine plywood up to 3” thick. One of the unique relationships these mills have is the ability to send all wood residuals to the Williams Lake Power Plant next door. Williams Lake Lumber also exhibits a paved log yard, which reduces overall dirt in the wood residuals, makes for easy clean up, and produces cleaner hog fuel. These mills have essentially zero nonhazardous wastes to deal with!
I had a wonderful day in the Cariboo and was able to learn lots about each town and their respective industries. Something that became apparent very quickly is how different each and every mill is, regardless of whether or not they belong to the same company. In Williams Lake I was lucky enough to witness how plywood is made from start to finish. In 100 Mile House I was able to see just how effective wood wastes and ashes can be as a soil supplement. In Chasm, I saw ‘clinker’ glass for the first time; an incredibly dense residual from the bottom of a power boiler that looks like lava rock and amber glass. That was all for July 3rd, the agenda for July 4th will be looking at the two pulp mills in Quesnel, BC and getting a feel for bio solids.
See you later Central Interior,